Boss LS-2 Line Selector Guitar Pedal with FREE 10' Guitar Cable
SIMPLIFIES YOUR SETUP
The LS-2 Line Selector pedal represents the easy way to switch settings among several effects devices or amplifiers, or route input and output signals. Two line loops and six looping modes provide a wide variety of applications.
- Compact line selection pedal for connecting and switching between multiple amplifiers and effects devices
- Provides two line loops with Level control and six looping modes
- Can supply power to several BOSS compact pedals when used with an AC adaptor
- The ideal power supply and master switching unit for multiple effects setups
- BOSS 5-year warranty
Nominal Input Level -20 dBu
Input Impedance 1 M ohm
Nominal Output Level -20 dBu
Output Impedance 1 k ohm
Recommended Load Impedance 10 k ohms or greater
Bypass Buffered bypass
Controls MODE selector switch
LEVEL knobs A/B
Pedal switch
Indicator Line indicator A/B (Used for indication of check battery)
Connectors INPUT jack: 1/4-inch phone type
SEND jacks A/B: 1/4-inch phone type
RETURN jacks A/B: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
DC IN/OUT jack
Power Supply Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)
Current Draw 25 mA
Expected battery life under continuous use Carbon: Approx. 14 hours
Alkaline: Approx. 30.5 hours
*These figures will vary depending on the actual conditions of use.
Accessories Owner's manual
Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
Carbon-zinc battery (9 V, 6F22)
Options (sold separately) AC adaptor: PSA series
SIZE AND WEIGHT
Width 73 mm
2-7/8 inches
Depth 129 mm
5-1/8 inches
Height 59 mm
2-3/8 inches
Weight (including battery) 410 g
15 oz
